Specifications

Disc Manager

• Disc Rotation

Disc Rotation - The rotation head is used to rotate pre-print-

ed discs to a proper orientation. The following print will be

aligned to the pre-printed surface. You have to use discs

with a special rotation mark and duplicator must has a spe-

cial rotation head installed and it must be also conﬁgured in

conﬁguration dialog. If you have this you can select offset

of rotation for all discs in your job. So, you can reprint into

specify place on the printable CD.

Disc Rotation - select offset of rotation for all discs in your

job. Range of rotation - 0 up to 360 degree.

OK - Click by mouse to OK button to save the offset

Cancel - Click by mouse to Cancel button to continue with-

out save new position.

Short description:

A - Rotation Mark B - Restricted area for print (white ring) C - Area for print (gray ﬁll)

4.3 Device Status

This window displays status of the connected devices. It shows status of the autoloader and its version and ﬁrmware,

status and progress of the each recorders and status of the connected printer. At the bottom of this window you can

see quantity of good and bad discs done from the start of Disc Manager. For show this window you can click at the

Device Status button on the toolbar or you can see it by clicking on the menu File -->Device Status.

Disc Manager