Specifications

Disc Manager
• Printing
The Printing bookmark enable printing on CD/DVD
surface (printable CD/DVD media). You can choose
the print file in *.prn or *.dml format. PRN file is make
by printer driver from any graphics software (Corel,
Photoshop, Illustrator, ...) and DML file is graphic for-
mat from Label Designer which is part of Disc
Manager software. If you choose printing job, you can
set order of doing job.
Enable Printing - enable printing in job.
Label print file - Click by mouse to icon and
browse the print file. Then click to Open.
Simulate printing - At simulation the printer looks
like producing CD or DVD, but it does not really print-
ing. The printable CD or DVD will be placed in the
printer but not printed too. It will be taken again from
the printer unprinted.
Print before recording - Choose printing order, you can set also classic order of doing job (record and then print) or
print before recording method.
Warning: if you use the Merge Field, Serialisation or
Bar Code (from Label Designer) with the automatic
duplicator (e.g. Alpha, Gamma, Delta, Omega), then
make sure that you have setup Print after Recording.
• Bin Setup
The Bin Setup bookmark allow you to set which hopper
is for your job input and which is output. This option will
be enabled only if you have your autoloader config-
ured with individual control of its bin.
Input Bin - set the input bin for created job
Output Bin - set the output bin for created job
Ordering disc for Alpha duplicators:
Note: this menu item doesn´t use for duplicators which has one input and one output bin, e.g. Omega, Gamma 2
and Gamma Office One with single bins. You have to use double bins (DB) for Gamma.
Summary of bins in duplicators:
Gamma 2,4 and 7 (DB) Alpha, Alpha Rack Omega - cannot be used Delta 3, 5 and 7
Identification Bins: 1 - Rear Left, 2 - Front Left, 3 - Front Right, 4 - Rear Right, 5 - Reject Bin
Disc Manager
45