Specifications

Disc Manager
scheduled discs according to the given jobs until all jobs have been done or the user stops the process. A job is
done when all discs have been produced. The Job Scheduler window doesn´t close only minimalize click by mouse
to button and reopen click by mouse to button in upper right corner the Job Scheduler window.
Tip: When you pointed by mouse to a Job you can see Tooltip about this job. Tooltip shows detailed informations
about Job. You can see Name of job, Note about job, recording Image include path, printing Label include path,
recording Speed, sorting input and output Bins and Rotation angle if rotation head is used. See picture:
Description of Job Scheduler buttons:
Duplication Mode - Disc Manager can duplicate discs
Read Disc Mode - Batch mode, Disc Manager can only read discs
Add - Insert predefined job
Delete - Delete inserted job
Edit - Edit inserted job
Copy - Copy of selected job
Arrow Up - Moves job higher in Job Scheduler to increase its priority
Arrow down - Moves job lower to decrease its priority
After click by mouse to Start button on the toolbar or after choose menu item Run / Start orAlt+U+S , the
Disc Manager starts the duplication until all jobs have been done or the user stops the process. A job is
done when all discs have been produced. There are several sections in the Job Scheduler window. Job
No. section is for identification job, this number is created automatically by Disc Manager. In Job Name
section you can see name of the inserted job. In Attributes section there are a few letters described below. Copies
shows total quantity of discs for duplication. Complete shows quantity and percentage amount of finished discs and
Bad shows number of bad discs.
Job No. - Identify the job
Job Name - Name of the inserted job
Attributes - There you can see following parameters:
Attribute E - Erase rewritable media
Attribute R - Recording
Attribute Rs - Recording simulation
Attribute V - Verification
Attribute P - Printing
Attribute Ps - Printing simulation
Attribute B - Print Before recording
Attribute W - Wait for previous job
Copies - Quantity of discs for duplication
Complete - Quantity and percentage amount of finished discs
Bad - Number of bad discs
Tip: During the duplication process the Disc Manager automatically saves state of Job Scheduler. So if there is
some problem with Disc Manager or with computer or hardware there is possibility to load scheduled jobs after new
start of Disc Manager from menu Job Scheduler/Load Scheduled Jobs.
Disc Manager
42