User guide

Imaging
6-5 KX Driver
This option also improves portability of printable data. (If cleared, device fonts may
not match when sent to a different printing system.)
The Substitute with device fonts option is disabled if Disable device fonts is
selected.
Graphics
From the Imaging tab, click Graphics to open the Graphics Settings dialog box.
Choose your graphics settings, and then click OK to save your selections. See below
for descriptions of graphics settings options.
Note: Some options are available only when a specific PDL is selected. To view or
change PDL settings, in the Windows Printers and Faxes folder, right-click the icon
for your printing system and select Properties. For further details on changing the
page description language, refer to PDL Settings on page 2-6.
Pattern Scaling
Adjust the pattern scaling to improve visual compatibility between screen and print
output.
If printed patterns and fills do not match the appearance of that on the screen, use
this feature to select a different print density.
Inversion Options
Inversion options are available when KPDL is selected in the PDL Settings dialog
box.
Pattern Scaling
Option Description
Auto (default setting) In most cases, this option prints patterns and fills to
match the on-screen appearance.
Coarse Prints patterns and fills with the fewest number of
lines, patterns, or dots. Coarse is the same as Auto
when PCL XL or PCL 5e/c is selected in the PDL
Settings dialog box.
Medium Prints patterns and fills with a greater number of
lines, patterns or dots than the Coarse setting.
Medium is the same as Auto when KPDL is
selected in the PDL Settings dialog box.
Fine Prints patterns and fills with the greatest number of
lines, patterns, or dots. Printed patterns and fills
may appear more dense than the on-screen
appearance.
Inversion options
Option Description
Reverse image Prints images like a photo negative, reversing black
and white areas of the image.