User guide

Layout
User Guide 4-7
to add extra margin space to the page for staples or hole punches. When used with
duplex printing, the enlarged gutter lines up evenly on both sides of the sheet. For
further details on duplex printing, refer to Duplex Printing on page 3-8.
• To increase outside margins on the left side of the page, enter a number into the
Left box. The Left option may not be available, depending on your Orientation
and Print on both sides settings in the Basic tab.
• To increase outside margins at the top of the page, enter a number into the Top
box. The Top option may not be available, depending on your Orientation and
Print on both sides settings in the Basic tab.
•Since the Gutter feature shifts document data to the right or down, select the
Reduce image to fit check box if the printed data extends beyond the edge of
the paper when changing the gutter setting. The size of the printed data is
decreased slightly to fit in the printable margins of the page.
• If the document data is small enough that it will not extend beyond the edge of
the paper when the gutter is increased, clear the Reduce image to fit check
box.
When you want to change the page size (for example, to enlarge an A4-size
brochure for printing on A3 paper), refer to Print Sizes on page 3-3.