User guide

Layout
4-6 KX Driver
You can use any combination of the following options in the Poster Settings dialog
box.
• Overlap edges
Select this option to duplicate the edges of document data on adjoining sheets.
Poster appearance is improved when the edges overlap slightly. Select the
check box, then type or select a value between 0.00 and 1.20 inches (0.0 and
30.4 mm). This option will reduce the final poster size slightly.
• Print crop marks
Select this option to print a border at the edges of each poster sheet. You can
crop each sheet on the border before assembling the sheets. This option
ensures that data on adjoining sheets will match precisely.
• Print assembly marks
Select this option to print numbers at the edges of each sheet, matching
numbers on adjoining sheets. Assemble each sheet edge to the same numbered
edge on another sheet. For a large poster with many sheets, this option ensures
that the poster will be assembled correctly.
Scaling And Gutters
Based on the page size and print size specified in the Basic tab, you can reduce or
enlarge the image from 20% to 500% of the original size, or increase the top or left
margin, before printing.
Scaling
Click the Layout tab in the Properties dialog box, and enter the scale percentage
into the Scaling (20-500%) box, or click the up or down arrow buttons to adjust the
value.
Gutter
Click Gutter to increase the outside margins in a range from 5.0 to 25.4 mm (0.20 to
1.00 inch). The left and/or top margins can be adjusted. This is useful when you want