Specifications

Default Setting (System Menu)
OPERATION GUIDE 8-27
8
You can use the number keypad to enter the
number directly.
4 Press [OK].
Border Erase to Back Page
Select the Border Erase Method for Back Page of a sheet. The table below shows the available settings.
NOTE: Refer to page 4-27 and page 5-26 for Border Erase.
Use the procedure below to specify the border erase setting for the back of the page.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function
Defaults, [ ] and then [Change] of Border Erase to
Back Page.
3 Press [Same as Front Page] or [Do Not Erase].
Press [OK].
Margin Default
Set the default margin. The table below shows the measurement ranges that can be set.
Item Description
Same as Front Page Border Erase performed in the same
setting as the front page
Do Not Erase No Border Erase performed on the back
page
Input units Range
Inch -0.75 to 0.75" (in 0.01" increments)
Metric -18 mm to 18 mm (in 1 mm increments)