User Guide

C-One
2
Quick Start and Regulatory Guide
Setting up your device
CAUTION
Failure to completely reseal the Micro SD | Micro SIM card slot cover may lead to water or other liquids
entering the casing which may cause damage to the device.
MICRO SIM card installation
• Open Micro SD | Micro SIM door.
• To remove the Micro SIM card: Insert a removal tool (pin type) into the hole then push until the tray
pops out.
• Put the Micro SIM card on the tray.
• Insert Micro SIM tray into SIM slot.
• Close the door after installation.
MICRO SD card installation
• Open Micro SD | Micro SIM door.
• Insert Micro SD card into Micro SD card slot.
• Close the door after installation.
NOTE
Micro SIM card and Micro SD card should be purchased separately.
Page 4 | 15
QSG 180190 A30