Use and Care Manual

Copper Armor 29-1310
Architectural Coatings PPG Copper Armor Interior Latex Paint + Primer Eggshell
PRECAUTIONS
PPG Architectural Finishes, Inc. believes the technical data presented is currently accurate: however, no guarantee of accuracy, comprehensiveness, or performance is given or implied.
Improvements in coatings technology may cause future technical data to vary from what is in this bulletin. For complete, up-to-date technical information, call 1-800-441-9695.
PPG Architectural Finishes, Inc.
One PPG Place
Pittsburgh, PA 15272
www.ppgpaints.com
Technical Services
1-800-441-9695
PPG Architectural Coatings Canada Inc.
1550 rue Ampère, Suite 500
Boucherville (Quebec) J4B 7L4
Architect/Specifier
1-888-PPG-IDEA
PRECAUTIONARY STATEMENTS. HAZARDS TO HUMANS AND DOMESTIC ANIMALS. CAUTION: Causes moderate eye irri-
tation. Avoid contact with eyes or clothing. Wear eye protection. Harmful if swallowed. Wash thoroughly with soap and water after
handling and before eating, drinking, chewing gum, using tobacco, or using the toilet. FIRST AID: If in eyes, hold eye open and
rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rins-
ing eye. Call a poison control center or doctor for treatment advice. If swallowed, call a poison control center or doctor immediately
for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by a poison
control center or doctor. Do not give anything by mouth to an unconscious person. Contains isothiazolinones. May cause allergic
reaction. Emergency telephone number: 1 [phone].
29-1310 10/2021
© 2021 PPG Industries, Inc. All Rights Reserved. PPG and the PPG Logo are registered trademarks of PPG Industries Ohio, Inc. Copper Armor is a trademark of PPG Architectural
Finishes, Inc. Corning and Guardiant are registered trademarks of Corning Incorporated.
Stir thoroughly before using and occasionally when in use. When using more than one can of the same color, intermix to ensure color uniformity.
USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Safety Data Sheet (SDS) information prior
to use. SDS are available through our web site or by calling 1-800-441-9695.
Application Equipment: Apply with a high-quality brush, roller, paint pad, or by spray equipment. Where necessary, apply a second coat and
allow each coat to dry thoroughly before applying the next coat.
Airless Spray: Pressure 1500 to 2000 psi; tip 0.015” to 0.021”. Spray equipment must be handled with due care and in accordance with man-
ufacturer’s recommendation. High-pressure injection of coatings into the skin by airless equipment may cause serious injury.
Brush: Nylon/Polyester Brush
Roller (nap roller cover): 3/8” - 3/4”
Thinning: Do not thin.
Permissible temperatures during application:
Material: 50 to 90ºF 10 to 32ºC
Ambient: 50 to 90ºF 10 to 32ºC
Substrate: 50 to 90ºF 10 to 32ºC
APPLICATION INFORMATION