Use and Care Manual

ManualsBrandsCOPPER ARMOR ManualsPaint1 gal. PPG1160-3 Rendezvous Eggshell Antiviral and Antibacterial Interior Paint with Primer

Architectural Coatings PPG Copper Armor Interior Latex Paint + Primer Eggshell

GENERAL DESCRIPTION PRODUCT DATA

RECOMMENDED SUBSTRATES

FEATURES / BENEFITS

PPG Copper Armor with Corning

Guardiant

technology is an inte-

rior paint that kills 99.9% of Viruses and Bacteria* on the painted sur-

face. Providing an continuous barrier against viruses and bacteria,

Copper Armor is great for commercial spaces like healthcare facilities,

senior living centers, education facilities, hotels, retail, and multi-fam-

ily, as well as in residential applications. This product provides excel-

lent paint characteristics such as durability and hide, while continu-

ously killing viruses and bacteria for up to 5 years**. PPG Copper

Armor is a premium paint and primer in one that provides a mildew

resistant coating and is formulated without VOCs***. This product is

only intended to supplement current sanitation and disinfection prac-

tices. It is not meant for use as a replacement for EPA-registered dis-

infectants. Continue any regular cleaning and/or disinfection practices

currently in place.

Concrete/Masonry Gypsum Wallboard-Drywall

Concrete Block (CMU) Plaster

Ferrous Metal Wood

PRODUCT TYPE: Acrylic Latex

SHEEN: Eggshell, 10-20 @60º; 20-35 @85º

VOLUME SOLIDS: 39% +/- 2%

WEIGHT SOLIDS: 53% +/- 2%

WEIGHT/GALLON: 10.8 lbs. (4.9 kg) +/- 0.2 lbs. (91 g)

VOC: 0 g/L (0.0 lbs./gal.)***

COVERAGE: Approximately 300 to 400 sq. ft. (28 to 37 sq. meters) per

U.S. Gallon (3.78L) on smooth, nonporous surfaces.

Wet Film Thickness: 4.0 to 5.3 mils

Wet Microns: 102 to 135

Dry Film Thickness: 1.6 to 2.1 mils

Dry Microns: 41 to 53

Coverage figures do not include loss due to surface irregularities and

porosity or material loss due to application method or mixing. Some col-

ors, drastic color changes, or porous substrates may require additional

coats to achieve a uniform finish.

DRYING TIME: Dry time @ 77ºF (25ºC); 50% relative humidity.

To Touch: 30-60 minutes

To Recoat: 2-4 hours

To Full Cure: 30 days

Drying times listed may vary depending on temperature, humidity, film

build, color, and air movement. Wait at least 30 days after painting

before cleaning the surface with a non-abrasive, mild cleanser. Very

deep colors may require longer to fully cure.

CLEANUP: Clean tools with warm, soapy water.

STORAGE AND DISPOSAL: Do not contaminate water, food, or feed

by storage or disposal. Protect from freezing.

PESTICIDE DISPOSAL: To avoid waste, use all material in this con-

tainer by application according to label directions. If wastes cannot be

avoided, offer remaining product to a waste disposal facility or pesticide

disposal program (often such programs are run by state or local govern-

ments or by industry).

CONTAINER HANDLING: Non-refillable container. Do not reuse or

refill this container. Offer for recycling if available or put in trash or in a

sanitary landfill.

FLASH POINT: Over 200ºF (93ºC)

PRODUCT INFORMATION

29-1310 White & Pastel Base

Refer to the appropriate color formula book, automatic tinting equip-

ment, and or computer color matching system for color formulas and

tinting instructions.

29-1310

COPPER ARMOR™ 29-1310

Read Label and Safety Data Sheet prior to use. See other cautions on last page.

Kills 99.9% of Viruses and Bacteria* - Providing a continuous barrier

on painted surfaces between cleaning and sanitizing.

Exceptional Durability & Hide

Continuously Kills for up to 5 Years** - Defending your walls against

viruses and bacteria* using the antimicrobial properties of copper.

Provides a Mildew Resistant Coating

Formulated without VOC’s*** - Great for working in crowded spaces

Paint + Primer

PACKAGING

CONFORMANCE STANDARDS

VOC compliant in all regulated areas

1-Gallon (3.78 L)

5-Gallon (18.9 L)

*Kills 99.9% of S. aureus (Staph), P. aeruginosa, K. aerogenes as well as MRSA, Enterococcus faecium, E. coli O157:H7, Salmonella enterica

and viruses Norovirus (Feline calicivirus) and SARS-CoV-2 within 2 hours of exposure when used as part of a comprehensive infection control

program for up to 5 years.

**If cleaning is needed, bleach-based or peroxide based cleaners are recommended to maintain the antiviral and antibacterial performance of the

paint. Using quaternary ammonium-based cleaners to clean the painted surface can reduce the antiviral and antibacterial effectiveness of the

coating. Do not use quaternary ammonium products to clean the painted surface.

***Colorants added to this base paint may increase VOC level significantly depending on the color choice.

Summary of content (3 pages)

PAGE 1
COPPER ARMOR™ Architectural Coatings PPG Copper Armor Interior Latex Paint + Primer Eggshell GENERAL DESCRIPTION PPG Copper Armor with Corning® Guardiant® technology is an inte- rior paint that kills 99.9% of Viruses and Bacteria* on the painted surface. Providing an continuous barrier against viruses and bacteria, Copper Armor is great for commercial spaces like healthcare facilities, senior living centers, education facilities, hotels, retail, and multi-family, as well as in residential applications.
PAGE 2
Copper Armor 29-1310 Architectural Coatings PPG Copper Armor Interior Latex Paint + Primer Eggshell GENERAL SURFACE PREPARATION Surface must be clean and dry. Remove all loose, peeling paint, dirt, grease, and any other surface contaminants. Putty all nail holes and caulk all cracks and open seams. Sand all glossy, rough, and patched surfaces. Plaster, concrete, and masonry surfaces must be completely dry, free of efflorescence, and allowed to cure for 30 days prior to painting.
PAGE 3
Copper Armor 29-1310 Architectural Coatings PPG Copper Armor Interior Latex Paint + Primer Eggshell APPLICATION INFORMATION Stir thoroughly before using and occasionally when in use. When using more than one can of the same color, intermix to ensure color uniformity. USE WITH ADEQUATE VENTILATION. KEEP OUT OF REACH OF CHILDREN. Read all label and Safety Data Sheet (SDS) information prior to use. SDS are available through our web site or by calling 1-800-441-9695.