User guide

CME 2 User Guide Motor Phasing
Copley Controls 99
10.1.3: Auto Phase Example: Stepper Amplifier with Encoder, in Stepper Mode
1
Verify that the Enable Input is not activated and that HV power is applied.
2
Click Auto Phase to open the Auto Phase Motor Direction Setup screen.
3
Move the motor in the direction you wish to be considered positive.
4
Activate the Enable Input.
5
Click Next to open the Auto Phase Motor Wiring Setup screen.
6
Click Start to begin motor wiring setup with default values.
After successful motor wiring setup, the message “Test Complete” appears.
7
Click Finish to close the screen and save values to flash memory.