User guide

Motor Phasing CME 2 User Guide
98 Copley Controls
10.1.2: Auto Phase Example: Stepper Amplifier, No Encoder
1
Verify that the Enable Input is not activated and that HV power is applied.
2
Click Auto Phase to open the Auto Phase Motor Direction Setup screen.
3
Hold down Move POS to move the motor in the direction considered positive, and
observe the direction of movement.
If the motor does not move see Motor wiring setup problems (p. 103).
4
If the motor moved opposite the direction that you wish to program as positive, click
Invert Motor Output.
5
Click OK to save the direction setting.