User guide

Amplifier Setup Procedure CME 2 User Guide
32 Copley Controls
...Setup Procedure, continued:
13
Test with load attached

On the CME 2 Main screen, click Save to Flash.

Remove amplifier power.

Attach load.

Reconnect amplifier power.

If necessary, re-tune velocity and position loops.

On the CME 2 Main screen, click Save to Flash.

On the CME 2 Main screen, click Save to Disk (for backup or duplication).

The amplifier tuning procedure is complete.
NOTE: To copy the results of this setup to other amplifiers,
see Copy Amplifier Data (p. 177).