User guide

Parameter Dictionary About This Manual
ABOUT THIS MANUAL
Overview and Scope
This manual provides cross-referenced definitions of the parameters used to program and operate Copley Controls drives.
Related Documentation
CANopen-related documents:
• CANopen Programmer’s Manual
• CML Reference Manual
• Copley Motion Objects Programmer’s Guide
DeviceNet-related:
• Copley DeviceNet Programmer’s Guide
Also of related interest:
• CME 2 User Guide
• Copley Indexer 2 Program User Guide (describes use of Indexer 2 Program to create motion control sequences)
• Copley ASCII Interface Programmer’s Guide (describes how to send ASCII format commands over an RS232 serial bus to control one or
more drives)
• Copley Camming User Guide (describes the use of the Copley Controls Camming feature, and its setup through CME 2)
• Extending Plus Module I/O application note.
• Setting Outputs at Position application note.
Links to these publications, along with hardware manuals and data sheets, can be found under the Documents heading at
http://www.copleycontrols.com/Motion/Downloads/index.html
Copley Controls software and related information can be found under the Software heading of the same page.
Comments
Copley Controls welcomes your comments on this manual. See http://www.copleycontrols.com for contact information.
Copley Controls Page 4