User guide

Xenus XTL User Guide Xenus Filter
Copley Controls Corp. 159
D.5: XTL-FA-01 Edge Filter Wiring
This section describes the wiring of the XTL-FA-01 Edge Filter.
D.5.2: Electrical Codes and Warnings
Be sure that all wiring complies with the National Electrical Code (NEC) or its national equivalent,
and all prevailing local codes.
DANGER: Hazardous voltages.
!
DANGER
Exercise caution when installing.
Failure to heed this warning can cause equipment damage, injury, or death.
Risk of electric shock.
!
DANGER
High-voltage circuits on Xenus J1, J2, and J3 and on Filter J1 and J2 are connected
to mains power.
Failure to heed this warning can cause equipment damage, injury, or death.
Do not ground mains-connected circuits.
!
WARNING
With the exception of the ground pins on Xenus J1, J2, and J3 and on Filter J1 and
J2, all of the other circuits on these connectors are mains-connected and must never
be grounded.
Failure to heed this warning can cause equipment damage.