SDS

Product name: COPIC INK
Prepared on: February 18, 2020
Revised on: April 21, 2020
6 / 14
3202112070116
Service Act. Therefore the risk assessment should be conducted, and take
measures stipulated in the relevant laws and regulations under the
Industrial Safety and Health Law, and other necessary measures to
prevent workers from dangers.
Install thermometers, hygrometers, pressure gauges, and other gauges in
the process for monitoring as necessary. Handle the product so as to
maintain the appropriate temperature, humidity, or pressure according to
the nature of the product. If any abnormalities are detected, appropriate
measures should be taken immediately.
Take facility measures described in “8. EXPOSURE
CONTROLS/PERSONAL PROTECTION” and wear protective
equipment.
Precautions for safe handling
:
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Prohibit using fire, spark or high temperature materials.
Do not handle the container roughly by overturning, dropping,
impacting, or dragging.
Avoid contact, inhalation or ingestion.
Avoid contact with the eye.
Use exhaust ventilation to keep the airborne concentration below the
occupational exposure limits.
Do not eating, drinking, or smoking while using this material.
Use only outdoors or in a well-ventilated area.
Avoid release to the environment.
Contact avoidance
(Incompatible materials)
:
See "10. STABILITY AND REACTIVITY”
Hygienic measures
:
Contaminated work clothing should not be allowed out of the workplace.
Install facilities for washing eyes/body, and/or for gargling, dressing
rooms, and a facility for laundering. A resting room should be in a place
where it keeps away from the workplaces.
Wash hands, arms, and face well after handling products as well as
before eating, drinking, smoking, using toilets, or at the end of work.
Clean the workplace to keep in good hygiene.
Storing conditions
Appropriate storing conditions
:
Apply the fireproof structure to walls, pillars and floors of the storage
room. Use noncombustible material for beams.
Use fire-resistant construction for roofs of the storage room. Cover the
roof with sheet metal plates or other light-weight noncombustible
materials. Do not make ceilings.
For floors of the storage room, apply a structure that prevents water
influx/infiltration.
For floors of the storage room, apply a structure that prevents infiltration
of hazardous substances, and make appropriate slopes and cesspools.
In the storage room, install the daylighting, lighting, and ventilating
equipment needed for storing or handling hazardous substances.
Keep container tightly closed. Store in a cool, well-ventilated place.
Keep away from ignition sources such as heat, sparks, and open flames.
-No smoking.
Store away from oxidizer.
Protect the container from direct sunlight or fire.
Store locked up.