=. STEM Maker Station Assembly Guide * For assistance, please contact us: STEM100_STEM102_2015_D : 1-800-267-8494 Check out our other products online at Email www.copernicused.com : Have your packing slip ready for reference + This product is meant to be assembled by an adult. WARNING + In its assembled state, small parts present a hazard. used under direct supervision of an adult.
Warning! Hazard Risks! Please read the warnings below for Important safety Information regarding your product. Allure to read these warnings or to follow the Instructions below could result In personal Injury or damage to your product that could cold your warranty. 9P In its assembled state, this product contains parts that can be hazardous to small children. This Sal product should be assembled by an adult. Parts [1] This product is to be used under the supervision of an adult.
= STEM Maker Station Parts Before beginning, you should have: Additional tools required: Adjustable wrench x1 Screwdriver i eg ra STERILE Premium STE I 08 Base) Bax 4 Casters mm checkpoint ON, = = Shelf SH looks ee y Tiny Tub Holder 1x Chloroplast Sign Tape Dispenser 1x Arm Left 1x & Front Stretcher Top Front Stretcher Re d dot sticker Tape Dispenser Am Right " Tape Dispenser Front 1x Cardboard Holder Top Cardboard Holder Bottom Cardboard Holder Shelf 1x A Frame ~ STRATEGY (Rose) Treasury Buk 2 Small Tub Ma
= STEM Maker Station Parts Before beginning, you should have: ~— Additional tools required: \ lju: le wrench x Screwdriver ® wos cel Se ® Ms 15mm © 2 Look 40mm x2 M6 Fiat a woo ran © (© M6 35mm ® M8 Lock Washer 2 © © wore © = CEQ 2, ® Me 19mm @ M5 Lock Washer Caster Wrench om ESTERS (ram) = fearsome Box d SL Wom Corn Nil, STEMMING ONLY “0 CA Powers trip Holder Cable Tie PowerPoint STEM100_STEM102 Version D Released 28 September 2015 Copernicus Educational Products Inc.
~ Tips for Assembly Using this Manual Watch for These Helpful Symbols i This symbol denotes a 2 Person Task. For safety, please ensure that there are two people working on steps displaying this symbol 2 Person | «Watch for this symbol throughout the Assembly Instructions. Wherever you see it, pay close H attention. The symbol denotes a step needing extra attention to ensure it is done correctly.
Tips for Assembly Watch for These Helpful Symbols This symbol denotes Person Task. For safety, please ensure that there are the suggested number of people working on steps displaying this symbol. ‘Watch for this symbol throughout the Assembly Guide. Wherever you see it, pay close attention. The symbol denotes a step needing extra attention to ensure it is done correctly. The star symbol highlights an advisory note. Before You Begin @® Lay out and identify all of the included parts.
Actual Size: You will need: (Not to Scale) ~ Main Frame Handle Frame x Attach Main Frame Handle to Frame Note the orientation of the Main Frame Handle to the bowed Proceed to Step 2b back leg of the frame. f you are assembling Lo STEMLESS (Base) NOTE: All Images will ba showing the Premium STEM | Maker Station (STEMLESS) unless otherwise stated. Actual Size: You will need: (Not to Scale) Peg Board Front Stretcher x 5x Pegboard Hooks 6x Premium Version: Attach Front Stretchers and Peg Board to Frame.
Actual Size: A] > You will need: (Not to Scale) Front Stretcher 5x Base Version: Attach Front Stretchers to Frame Do not install hardware here. The hole on the Front Stretcher should be facing upwards. Actual Size: AN] > o You will need: (Not to Scale) Top Front Stretcher Red dot sticker 1x Install Top Front Stretcher. Note the orientation of the holes on the stretcher. Check for the Red dot on the stretcher. This will denote the proper stretcher for this step.
Actual Size: ® M12 Lock Washer 4x You will need: (Not to Scale) 4” Casters w/ pinch point covers Caster Wrench 4x 1x Insert Casters into bottom of Frame Lock Caster before installing to make installation easier. Place Caster Wrench around the Tighten each caster by turning wrench hexagon collar on caster in a clockwise direction until tightened. PLEASE KEEP WRENCH WITH UNIT. Casters need to be tightened every 6 months for proper maintenance.
You will need: (Not to Scale) ¥ [ope Dispenser Arm “ Dispenser Arm Right Tape Dispenser Front pg Assemble the Tape Roller then attach to the side of frame.
Actual Size: You will need: (Not to Scale) 7 Lower Shelf 1x Actual Size: 2 wwe © ¢ You will need: (Not to Scale) Tiny Tub Holder 1x ee Attach Tiny Tub Holder Tiny Tub Holder angles downwards.
Actual Size: You will need: (Not to Scans) \ Rod Left \ Rod Right 1x 1x Attach Left and Right Sign Rods Top tabs should be facing inwards. ie Actual Size: You will need: (Not to Scale) Chloroplast Sign 1x Attach the Top Metal Channel to the Sign Rods your station. LE 12 STEM100_STEM102 Version D Released 28 September 2016 Copernicus Educational Products Inc. Ed Chloroplast Sign is a great place to display work or to personalize Metal Loops should be facing the back Hu of the cart.
Actual Size: You will need: (Not to Scale) Cardboard Holder Bottom 1x Cardboard Holder Shelf [I 1x Unfold Cardboard Holder Bottom and slide Cardboard Holder Shelf into place. Slide Cardboard Holder Bottom over Stretchers 13 STEM100_STEM102 Version D Released 28 September 2015 Copernicus Educational Products Inc.
You will need: (Not to Scale) Cardboard Holder Top 1x Unfold Cardboard Holder Top and slide into place. Actual Size: You will need: (Not to Scale) Install hardware to secure Cardboard Holder to Frame.
Actual Size: ‘You will need: (Not to Scale) secure hook! White Board 1x Install White Board onto STEM Maker Station Attach ‘S’ Hooks onto White Board, then hook board on top wire of Cardboard Holder. Remove film before use. Rome 15 STEM100_STEM102 Version D Released 28 September 2016 Copernicus Educational Products Inc.
Actual Size: You will need: (Not to Scale) Install Tubs into STEM Maker Station Premium Tub Pack es 4x Small Tub _~ 1x Tech Tub 4x Tiny Tub 2.5 |be Weight Limit iE 4x Tiny Tub ~~ Yi agrarian; 4% Open Tub 16 STEM100_STEM102 Version D Released 28 September 2016 Copernicus Educational Products Inc.
Actual Size: You will need: (Not to Scale) Secure power strip with Cable Ties, being sure not to obstruct outlets Wrap the excess power strip cord around the hooks Cable Ties 17 STEM100_STEM102 Version D Released 28 September 2015 Copernicus Educational Products Inc.
STEM Maker Station Assembly Guide For assistance, please contact us: LN STEM100_STEM102_2015_B Copernicus 1-800-267-8494 educational products Check out our other products online at Email www.copernicused.com Have your packing slip ready for reference Dear Educator, Thank you for purchasing one of our products. I hope the assembly of your STEM Maker Station went well.
