Installation & Assembly

Assembly Instructions for Essentials Tables

Tools required

Components included:

Hairpin legs or wood legs (4),

Kidney coffee table (3)

Lean the table top on its back on a soft

surface. Align the holes in each leg

plate and the holes in the bottom of the

table top. Use provided Allen wrench to

tighten each leg with hex bolts (Figure

1 and Figure 1-1).

Step 1: Install the table legs

Figure 1.

Install the hairpin legs

Step 2: Stand the table upright

Lift the table upright and gently set 4

legs on the floor.

Figure 1-1.

Install the wood legs

¼” 20x25mm

hex bolt

Leg plate

Allen wrench

Hardware included:

¼” – 20 x 15mm hex bolts (16,

Kidney coffee table - 12)

Allen wrench (1)

Table top

Please identify the

listed items before

installation

Essentials Tables utilize

different height hairpin legs

(or wood legs) to match

different sizes (shapes) of

table tops. This instruction

sheet uses a 24” x 48” x 24”

end table to illustrate the

installation steps.

For Round table instructions,

please see page 2.

PAGE 1
Assembly Instructions for Essentials Tables Please identify the listed items before installation Hardware included: ¼” – 20 x 15mm hex bolts (16, Kidney coffee table - 12) Allen wrench (1) Components included: Hairpin legs or wood legs (4), Kidney coffee table (3) Essentials Tables utilize different height hairpin legs (or wood legs) to match different sizes (shapes) of table tops. This instruction sheet uses a 24” x 48” x 24” end table to illustrate the installation steps.
PAGE 2
Tools required Allen wrench Install legs for Round tables Round Essentials tables have two sets of mount holes for each leg underneath the table top (Figure 2). The 28.25” hairpin legs (three rod style) utilize the inner four holes for the installation of each leg. The 17.25” hairpin legs utilize the outer four holes for the installation of each leg. Hairpin Leg ¼” – 20 x 25mm hex bolts Inner holes for 28.25” legs Figure 2. 18” Round Coffee Table Outer holes for 17.