Instruction Manual

4/8/16-CH DVR Quick Start Guide

10. Remote Surveillance

In order to view the DVR from a network it must be connected to a LAN/WAN or

internet. The network setup should be done accordingly.

10.1 Access DVR on LAN

 Please enter into MenuSetup Network Setup as shown below:

 Input IP address, Subnet, Gateway. If using DHCP, please enable DHCP in both the

DVR and the router. Enter into Menu  Information  Network, and user can

check the network settings of the DVR.

 Enter into Record Setup to set network video parameters like resolution, frame rate

etc.

 Open IE on a computer on the same network. Input the IP address of the DVR in IE

address bar and press enter. If HTTP port is not 80, add the port number after IP

address.

 IE will download ActiveX component automatically. Enter the username and