Instruction Manual

4/8/16-CH DVR Quick Start Guide
7
Step 2: Click “ ” button to add a certain day schedule; click “ ” button to
delete the selected schedule;
Step 3: You can also double-click the grid to pop up a week schedule window.
Select day and then click „Add‟ button to setup the start time and end time. Then
select other days and click „Copy‟ button to save the setting to other days. Finally,
click „OK‟ button to save week schedule.
Step 4: Select other channels and set timeline for them or select „Apply Settings To
All Channel and click “Copy” button to set the same settings for all channels.
7.3 Motion Based Recording
Motion detection based recording: when there is a motion event detected, the camera
will be triggered to record.
To Setup Motion Based Recording:
Step 1: Enter into MenuSetupScheduleMotion tab. The setup steps for
schedule for motion based recording are similar to normal schedule setup. You can
refer to 7.2 Schedule Recording for details.
Step 2: Enter into MenuSetupAlarmMotionMotion tab as shown below.