Instruction Manual

4/8/16-CH DVR Quick Start Guide

Basic configuration: Users can set video system, menu language, audio, time and

authorization check.

Live configuration：Users can set name/time display, picture color and hide

cameras.

Record configuration：Users can set record quality, frame rate, resolution, time

stamp and recycle.

Schedule configuration: Users can set schedule for timer, motion detection, and

sensor alarm respectively.

Alarm configuration: Users can set sensor type, alarm trigger and buzzer alarm.

Network configuration: Users enable network function, and configure IP address,

DDNS, transmission video parameters here.

User configuration: Administrator can add, delete users, and change their

authorization

PTZ configuration: Users can set protocol, baud rate, address, presets and auto

cruise track here.

Advanced configuration: Users can reboot the device and import & export data into

or from mobile storage medium.

7. Recording Setup

A user needs to install and format a HDD, and set all the recording parameters before

recording. There are four kinds of record modes.

7.1 Manual Recording

A user can press REC button on the front panel after quitting system setup. Press this

button again to stop recording.

Or press REC button on remote controller. Click it again to stop.

Or click REC button on the tool bar with mouse. Click it again to stop.

7.2 Schedule Recording

To Setup Schedule Recording:

Step 1: Enter into MenuSetupSchedule tab. Refer to the following picture.