Instruction Manual

DVR User Manual
48
7.2.2 On WAN
There are also two ways for DVR to connect to Internet.
1. Connect the DVR to internet through router or virtual server
Step 1: The network setups are the same as step one to step four of point 1 on WAN of IE
remote surveillance.
Step 2: Enter WAN IP and http port in the Safari browser to install the Active control. The
concrete steps are the same as step 5 and 6 of Chapter 7.2.1.
2. Connect the DVR to internet directly.
Step 1: The network setups are the same as step one of point 2 on WAN of IE remote
surveillance.
Step 2: Enter WAN IP and http port in the Safari browser to install the Active control. The
concrete steps are the same as step 5 and 6 of Chapter 7.2.1.
7.3 The Remote Live Preview
Fig 7-1 Remote Live Preview Interface
Symbol and function definitions:
1
Channel indicator
2
Screen display mode
3
Volume
4
Start recording
5
Snapping picture
6
Bidirectional talk
7
Start IE record
8
Playback
9
PTZ control
10
Color
11
Master/sub stream status