Instruction Manual

DVR User Manual

Step 4: Right click to exit the mask setting interface.

Step 5: Click Apply button to save the setting.

To delete mask area

Step 1: Click Setting button in the mask interface.

Step 2: Select a certain masked area and double click to delete that masked area.

Step 3: Then click Apply button to save the setting.

Setup Mask Area

4.3 Record Configuration

Record configuration includes six sub menus: enable, record bit rate, time, recycle record,

stamp and snap.

Before Configuration, please make sure your DVR has been installed with HDD and has

completed its initialization.

4.3.1 Enable

Step 1: Enter into MenuSetupRecordEnable interface. Refer to Fig 4-11:

Fig 4-11 Record Configuration-Enable

Parameter

Meaning

Record

To enable/disable recording for the channel

Audio

To enable/disable audio recording for the channel