Instruction Manual

DVR User Manual
17
4.2.3 Spot
Step 1: Enter into System SetupLiveSpot. Refer to Fig 4-9:
Fig 4-9 Live Setup-Spot
Step 2: Select Display Mode: 1×1 and map the channel.
Step 3: Set the dwell time. Click button to set the previous channel, click button
to set the latter channel.
Step 4: Select the display mode and setup current picture group.
Step 5: Click „Apply‟ button to save the settings.
4.2.4 Mask
If there is something you don‟t want to display in the live image. You can set mask. For a
given channel a maximum of three areas can be masked.
To setup mask area:
Step 1: Enter into MenuSetupLive Mask interface.
Fig 4-10 Live Configuration-Mask
Step 2: Click Setting button to go into live image.
Step 3: Press and drag the left mouse button to set mask area as shown below.