User`s manual

16 Channel Digital Video Recorder

be displayed after “PTZ”, please refer to the picture below:

You can push upward, downward, leftward, rightward button to move the speed dome, and

push the enter button to stop. If you push the Iris button, the character “Iris” will appear on the

screen, please refer to the picture below, then you can push the “+” and “-” button to change the

iris, the same to control the focus, zoom, and speed, also push enter button to stop.

Push the PTZ button one more time to exit from PTZ control.

15.Default Setting

Default setting for each item is shown in the below chart.

“Defaults” is the initial setup by the manufacturer. User can change the setup according to the

actual environment and demands. If there is any confusion or unexpected effect, choose

“Defaults” and readjust.

You can choose “FACTORY RESET” in “SYSTEM SET” menu, and reset all settings to

default setting.