User`s manual

16 Channel Digital Video Recorder
recorded area; if the system is set to overwrite disable, it will stop recording.
4.Alarm Recording
Alarm recording is not started by manually pushing record button, all the recording started
by manually pushing the record button are normal record.
Alarm recording can be activated by alarm input signal or motion, so it must to check
whether the connection of alarm input equipment is correct, stable and reliable, and the alarm set
is right, please refer to sensor setup.
The prerequisite condition of whether the alarm recording can be activated by exterior input
signal or the motion is that the system must be set on schedule, also, in the menu of alarm setup,
for exterior input alarm, alarm enable of that channel must set to “ON”, for motion alarm, motion
enable of that channel must set “ON”, and set the right area for motion detect.
Under the state of off-schedule, system will never start alarm recording. Setting schedule on
or off is achieved through pushing the schedule button on the front panel, but not through system
setup menu and window. Under schedule-on situation, the character “S” will display on the
screen.
Alarm video recording cannot stop by pushing record button, but can stop by removing
schedule. Because once the system is set on schedule, the schedule cannot be removed randomly,
so there is a password protection to remove schedule, only after inputting correct password, you
can take schedule off.
Check alarm recording setup before recording; confirm the video quality and the frame rate,
the record setting cannot change during recording process.
As long as the alarm input signal is effective, the alarm recording continues. When the alarm
input signal loses efficacy, the time set up by “A/M REC TIME” becomes effective, and when the
time goes out, the alarm recording automatically stops. In course of this, if you want to manually
stop alarm recording, the only way is to remove schedule (answer the password).
5.Time Recording
Time recording starts and stops recording automatically according to the pre-arranged time
period. It is applied to fixed timetable, for example, the periodical work time recording (or off
time recording) with fixed start/stop time.
To start Time recording function, besides making record schedule setup beforehand, must
push down the schedule button on the front panel to set schedule on. While pushing down this
button, the schedule symbol “S” will display on the screen. Without pushing the schedule button,
the Time recording parameter setup will not work.
The prerequisite condition of whether the time recording takes effective is system must be
set on schedule.
29