User`s manual

16 Channel Digital Video Recorder

1.Start the Machine

Before starting the machine, please make sure all the items in the “Security Notice” at the

beginning of this manual are fulfilled.

Before starting the machine, please check the system connection, input and output

equipment connection.

Please insure the video-recorder’s input video (NTSC/PAL) and the monitor (NTSC/PAL)

meet the demands.

Start exterior equipment after checking over.

Insert the removable hard disk case to the end, and lock it up (turn right the hard disk lock);

connect the power, the machine start to work.

2.Turn off the Machine

Normally turn off the machine when the system shutdown, which means do not to turn off

the machine while playing or system setting up, especially not to turn off the machine while

recording

Push recording button to stop recording or push playing button to stop playing or exit from

system setup menu, then turn off the power.

If do not use the video recorder for a long time, should pull out the power line from the

electrical outlet.

3.Normal Recording

Connect the power to all related equipments; ensure that there is video input.

Push display button to check spare space of the hard disk, if there is no much space, please

think whether to change hard disk first or select overwriting modes.

Check recording parameter setup before recording; select video quality, frame rate. you

cannot change record setting during the process of recording.

Manual recordings belong to normal recording. Under the manual mode (non-schedule

status), here pushing record button will record all channels’ video.

Push the record button to begin recording, sixteen channels will start simultaneously

recording. While in normal recording mode, push record button, and enter the right password, it

will stop recording.

During the process of recording, if the hard disk is full, and the system is set to automatic

overwrite, then the recording will not be interrupted, and it begins to overwrite the earliest