User`s manual

16 Channel Digital Video Recorder

4.Hard Disk Connection

There are process to install the hard disk.

Note: If the DVR comes with a HDD, skip the following steps.

1. Pull out the hard drive rack from the DVR side

panel.

2. Open the top cover of the drawer.

3. Jump HDD to Master

Jump to Master

4. Connect the ribbon cable (IDE) cable & power

cable.

5. Close the top cover of the drawer and put the hard

drive drawer back into the DVR. (Make sure the

cables are firmly pressed onto the HDD interface

)

6. Lock the hard drive draw by turning the key

clockwise.

If you have another HDD, please jump that HDD to SLAVE, and open the machine, put the

HDD to the HDD shelf, and then connect the power and digit cable.