User`s manual

16 Channel Digital Video Recorder
25. Protocol Set
Set the right protocol, you can control the SPEED DOME by the DVR..
When the cursor moves to Protocol Set, then push enter button, the protocol set window will
appear, which is illustrated as below. Push upward or downward button to move the cursor, and
push “+” or “-“ to change the value.
CHANNEL SEL: select the channel that is connected to the speed dome which you want to
control
BAUDRATE: Can change form 1200bps to 19200bps.The default is 2400bps.
DOME ADDR: The address of the speed dome, changeable from 0x00 to 0xff。
PROTOCOL: The protocol that DVR control speed dome, include pelco-p, pelco-d, neon, lilin,
default is pelco-p.
20