User`s manual
16 Channel Digital Video Recorder
ALARM ENABLE: alarm trigger switch, can be set to off, low lever or high lever. If users set
it to off, the DVR will ignore the alarm input.
MOTION ENABLE:Motion alarm switch, can be set to on or off, if set to off, the motion
alarm will be ignored.
MOTION LEVEL: motion sensitivity level, if the figure in the picture is small, please set to
high or very high, the default is normal.
BUZZER TIME: buzzer sound time when there is a sensor or motion alarm.
SENSOR RECTIME: when a motion or sensor alarm occurred, the DVR record last time, the
default is 1 minute
Note: Users should press Schedule button after setting up the parameters so to activate
the settings.
20. Motion Detection settings
1) When surveying nearby objects (2-10 meters)
When in daytime, please set motion detection sensitivity as Normal level; when in night,
please set as low.
2) When surveying objects in 50-100 meters area
The objects 50-100 meters away will be quite small on the screen. When in daytime, please
set motion detection sensitivity as high level.
16