User`s manual

16 Channel Digital Video Recorder
If one channel here set OFF, this channel will not transmit to the network, so if you want to
see a channel from network, you have to set this channel on.
18. Mac Set
When the cursor moves to Mac Set then push enter button, the Mac Set window will appear,
which is illustrated as below.
If you have more than one DVR in a local area network, you have to set each DVR to have an
exclusive MAC address, but remember that you have only one chance to modify the MAC address,
once you have changed the MAC address, this menu will not appear again. If you want to change
the MAC address again, please load the factory set, then you can change the MAC address again.
19. Sensor Setup
When the cursor moves to Sensor Set, then push enter button, the sensor setup window will
appear, which is illustrated as below. Push upward or downward button to move the cursor. Push
“+” or “-“ to change the value.
15