User`s manual

16 Channel Digital Video Recorder
IP MODE: the DVR has 2 IP mode, STATIC IP and DHCP, if you select STATIC IP, you have
to set the IP address manually, if you select HDCP mode, the DVR will automatically get the IP
address.
For STATIC IP, push upward, downward, leftward or rightward button to move the cursor
among the digits, you can push add and DEC button to modify the digits, also, when select a digit,
you can push enter button then push left or right button to select each bit of the digit, and then
push add or DEC button to modify the bit of this digit, push enter to save you change.
NETWORK ENV: the DVR has three types of different network conditions: LOCAL,
EXTER_LAN, EXTER_WAN, if in local network, please select LOCAL, if for internet use,
please choose EXTER_LAN, if the internet condition is not very good, please select
EXTER_WAN.
VIDEO PORT: the video transmit port for the computer.
COMMAND PORT: the command transmit port for the computer.
If you change any of the VIDEO PORT and COMMAND PORT, you have to restart the DVR to
use the “net viewer” software.
Note: if you have change the MAC address, you can not see the “MAC ADDR SET”.
17. N/W Enable Set
When the cursor moves to N/W Enable, then push enter button, the N/W Enable setup window
will appear, which is illustrated as below.
14