User`s manual

16 Channel Digital Video Recorder
cannot access this menu unless you stop record or play first.
OVER WRITE: if set to “YES”, the DVR will automatically overwrite the HDD from the
beginning when the HDD is full. If set to “NO”, the DVR will automatically stop recording when
the HDD is full. If there are two HDD in the DVR, when the MASTER HDD is full, the video will
store to the SLAVE HDD, and when the SLAVE HDD is also full, the DVR will overwrite the
MASTER HDD if set this to yes, otherwise it will stop recording if set to no.
REC SPEED: the recording frame rate of the DVR, factory default setting is 30F/SEC for
NTSC (25F/1SEC for PAL), Which means DVR records the events at the speed of 30 shots of
frames per second. The higher the record frame rate, the more natural look will be displayed on
the screen when you playback. The lower the record frame rate, the more you can save the space
on the hard disk. The highest frame rate is 120F/SEC(PAL is 100F/SEC) when the resolution is in
320 size.
REC QUALITY: There are four different video quality settings: VERY LOW, LOW,
NORMAL, HIGH and VERY HIGH. The higher the video quality, the clearer images when you
playback. The lower the video quality, the more you can save the space on the hard disk drive.
RESOLUTION: the record picture size of the DVR, there are two modes: 360 and 720,default
is 360. In 720 mode, the record picture is twice bigger than in 360 mode, in 320 mode the REC
speed is 120F/SEC(PAL is 100F/SEC) and the maximal REC speed in 720 mode is 60F/SEC(PAL
is 50F/SEC).
PB SPEED: the frame rate of playback, default is NO USE, which means the same as record.
14. Audio ch Setup
When the cursor moves to Audio CH Set, please push enter button, the Audio CH Setup
window will appear, which is illustrated as below.
There are four audio input channels, for each channel you can select anyone of the 16
channels. Although there are four audio input channels, you can only record one channel’s audio at
the same time, so, for the right audio set, you have to select one channel in these four channel in
the Record Setup menu.
12