User`s guide

PAN SCAN

This DVR system allows the user to set up the PTZ camera to scan from the

SET START to SET END.

1.AUTO PAN: allows the PTZ camera to move horizontally from the

set start and set end.

2.SET START: this parameter is used to set the current preset point as

the SET START.

3.SET END: this parameter is used to set the current preset point as

the SET END.

4.SCAN SPEED: used to select the speed (from 0-255) for PTZ

camera AUTO PAN. After finishing the selection of this setting,

please click “SET SPEED” to save the setting.

Figure 12-7: Pan Scan

The DVR system supports many PTZ camera types which have different

functions and a variety of settings, so please read the related camera user

manual to choose the appropriate settings for your camera(s).