User`s guide

Chapter 12

in particular directions more conveniently.

The main purpose of Group presets is to allow the user to Auto Pan to spe-

cific preset points.

When the presets are complete, follow these instructions to Auto Pan the

PTZ cameras according to the presets in the groups:

1.Create all the presets in the groups.

2.Choose the number of your desired group (Group 1, Group 2, Group

3 and Group 4) under the Pan Group Number.

3.Click “Set Group”

4.Click “Run Sequence”, then the PTZ cameras will begin to Auto

Pan according to the presets in the group.

Figure 12-6: Pan Group

Example:

• Setting Group 1

Choose Group 1, and click “Set Group” button.

Function: To operate presets 1 to 4 automatically in the mode of

“Run Sequence”.

• Setting Group 1 and Group 2

Choose Group 1 and Group 2,

and click “Set Group” button.

Function: To operate presets 1 to 8 in the mode of “Run Sequence”.

• Setting Group 1, Group 2, and Group 3

Choose Group 1,

Group 2, and Group 3, then click “Set Group” button.

Function: To operate presets 1 to 12 in the mode of “Run Sequence”.

• Setting Group 2, Group 3, and Group 4

Choose Group 2,

Group 3, and Group 4, then click “Set Group” button.

Function: To operate presets 5 to 16 in the mode of “Run Sequence”.