User`s guide

62
Preset Setup
Once you have become familiar with these settings and defined your de-
sired parameters, you are ready to preset your PTZ camera. The Digital
Video Recorder provides users with 128 preset positional orientation points
for each connected PTZ device. For each preset point, users can adjust the
speed and duration interval for the camera.
1.Specify the preset point number (from 0 to 128): 0 means NULL,
that’s NO MOTION).
2.Set the Speed of the PTZ camera adjustment (range from 0 to 7),
then adjust the Dome orientation.
Figure 12-5: Preset Setup
3.Specify the “Speed” within the preset point field (this ranges from 0
degree per second to 255 degrees per second) and the duration
“Time” (range from 0 to 255 seconds) to make adjustments to
preset speed and duration time for the PTZ camera.
4.Once complete, click the “Save”
button .
5.To view any of the preset camera pictures in later time, just insert
the appropriate camera number in the “Preset” field.
6.Click “Clear one preset”
to delete a preset
point.
7.Click “Clear all preset”
to delete all presets.
Grouping Presets
The Digital Video Recorder gives users the option to set up to 128 presets.
Of the 128 presets, presets 1 to 4 make up Group One, presets 5 to 8 make
up Group Two, presets 9 to 12 make up Group Three and presets 13 to 16
make up Group Four. The remaining presets are only used to view pictures
preset points