User`s guide

44
5.Click the checkbox next to “Enable” first, then click “Enable Trigger
Period” again and enter the period. With this function, the users don’t
need to be in an alarm environment all day long, and they can set their
own desired alarm period according to their actual needs.The “Dura-
tion” is for setting the active alarm period (ex: The same kind of alarm
will be overleaped during the Alarm Duration) and the recording frame
rate when alarm-received. (Which only functions when you selected
the record trigger mode) It is adjustable for each is camera and DI.
6.Then select one of the Triggering Devices from the “Tab” field
windows below.
Alarm Record Triggering
The following shows how to use Record Alarm:
1.Click the “Alarm” Tab first.
2.From the “General” tab select the “Duration” for motion detection
triggering and click the checkbox next to “AdjustFrameRateTo”.
to select the frame speed for the motion detection.
Figure 8-2: General Field
3.Select the appropriate triggering event for alarm recording
(“Camera”, “Din”)
4.Select the entire “Enable” field for to enable 24 hour recording
duration. To set up other record durations, tick off the entire
“Enable” field first, then select “Enable” under “Trigger Period”
to set the record duration.
5.Click “REC”.
6.Click “Add”
7.Click “Apply” , then “OK” to activate.