User`s guide

28
9.Click the checkbox next to “Remote” to give the user remote access.
(Remote access means users are able to access the DVR over the local
LAN or Internet.) Select which cameras you would like the user to
access by clicking the checkbox next to the camera number.
Figure 6-2: Account Tab Selection
10.Select “Password can be set from remote” to enable users to
change their username and password through a browser over the LAN
or Internet.
11. Selcet “Allow config from remote” to enable users to change
their system configuration through a browser over the LAN or Internet.
12. Click “Allow Playback” to enable users to playback the recording
files.
13. Click “Allow Control PTZ” to enable users to control PTZ cameras.
14.Select a checkbox to mark a given camera as available to the user being
created or modified. This function is primarily utilized to restrict a
given user's ability to monitor specific areas.
15.Then click the “Add”
button. The DVR will be add the user to
the list with the selected authority.
Click
Enter the name of the
user followed by a
specified password
Authority selection
Camera Selection