Instruction manual
5
View
Display
Each camera can be selected to display as a Full Screen image by pressing the
corresponding camera button on the front of the DVR.
Alternatively, to select the on screen format press VIEW
Each time the button is pressed the display will change to the next available format.
Repeat until the screen displays the cameras as required.
e.g.
Sequential - displays the image from each camera, full screen, sequentially.
Picture in Picture - displays two camera images simultaneously, (one within the other).
(these will have been pre-dened by the engineer).
4-Up - displays the images from four cameras simultaneously.
* 9-Up - displays the images from nine cameras simultaneously.
* 16-Up - displays the images from sixteen cameras simultaneously.
* where available on DVR.
Example:
Split screen,
9 cameras.
Zoom
To digitally zoom in on a Live image press ZOOM
Use the Navigation buttons to move the zoom area around the screen.
Press the ZOOM button again to zoom out to normal view.
Note: The zoom feature is only available on full screen live images.