Instruction manual

17
PTZ
The Pan Tilt Zoom feature on any connected PTZ camera can be controlled over your
web browser.
Click on the PTZ tab and you will be presented with all the PTZ control screen.
Enter the number for a camera
preset by clicking on the keypad.
Click :-
Go to view the preset.
Clear to remove the preset.
Set to save as a preset.
A conrmation message will be
displayed on screen when using
COP dome cameras.
Click on the arrows to Pan and
Tilt the camera.
Click to zoom IN and OUT.
Click to open and close the Iris.
Select the Step rate (dome
speed) from the drop down
menu for the Pan and Tilt
operation.
(Note: to stop ‘continuous’
click the centre button of the
Pan/Tilt arrows).
Click to Focus (Far and Near).