User`s manual

50
user name and password to send emails, please click the icon “Authorization SMTP”
to enter the user name and password.
Note:
(3) Key in sender’s full email address. It must be a valid email address.
(4) Add Alarm Notice: Click the icon Add to see the follow figure.
(5) Alarm Duration: The duration time can be from 1 minute to 1440 minutes (1 day).
When the “Alarm” happens, the DVR system will send the alarm notice one time
during the duration and do it again in next duration until the “Alarm Source”
disappears.
(6) Select alarm Source. Please refer to the definition of each alarm source.
(7) Action: Click the icon “E-Mail” and key in the email addresses which will receive the
alarm notice. You can enter three email addresses to be notified for a single alarm.
(8) Click “OK” when you have done the setting.
(9) You can add another alarm notice by repeating the step (4) to (8).
 If you don’t know the IP address of your mail server, you can ping the mail server to
get the IP address as following figure.