User`s manual

39
11. Recording Schedule: Refer to the Recording Schedule Table below. There are 7 rows and
24 columns in the schedule table, which represents 7 days and 24 hours.
There are three recording modes:
 Full recording.
 Motion sensor recording
 No recording
12. Copy Camera Setting: After finishing the camera setup for one camera, you can click the
“Copy Camera Setting” button, located on the upper right of the “Camera Setup” screen, to
copy the setting of this camera to other cameras. This saves time and effort. The following
dialog will appear. Click the setting area you would like to copy (Refer to the three “areas”
below), and then click the cameras located on the right of the screen and click “OK”.
13. Motion Sensor Setup: This is used to set the motion sensor area.
13-1 Method One
(1) Click