◄Triplex DVR► User's Manual Triplex Real Time Stand Alone DVR 15-VT04-CDRW 15-VT08-CDRW 15-VT16-CDRW [ 4 / 8 / 16 Channel DVR ] 1
◄Triplex DVR► CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE SERVICE PERSONNEL. Please beware of the following precautions before installing the DVR. • Avoid any place with moisture, dust, or soot. • Avoid any place with direct sunlight or heating appliances. • Keep the product away from electric shock or magnetic substances. • Avoid high or low temperature. (Recommended operation temperature is between 0°C ~ 40°C).
◄Triplex DVR► Contents CHAPTER 1. KEY FEATURES CHAPTER 2. PACKING DRTAILS CHAPTER 3. NAMES AND FUNCTIONS 3.1 FRONT PANEL 3.2 REAR PANEL 6~7 8 9 9~10 11~12 CHAPETR 4. INSTALLATION 4.1 TOTAL CONNECTION DIAGRAM 4.2 INDIVIDUAL CONNECTION 4.2.1 POWER 4.2.2 CAMERA 4.2.3 MONITOR 4.2.5 AUDIO 4.2.6 USB 13 13 14 14 14 15 16 17 CHAPTER 5. OPERATION 5.1 FACTORY DEFAULT 5.2 FRONT PANEL CONTROL FUNCTION 5.2.1 MULTI DISPLAY 5.2.2 PIP DISPLAY 5.2.3 AUTO DISPLAY 5.2.4 TRIPLEX DISPLAY 5.2.5 DVR INFORMATION 5.2.
◄Triplex DVR► Contents 5.3.3 DIGITAL ZOOM 5.3.4 PANORAMA 5.3.5 PTZ CONTROL 5.3.6 BACKUP CHAPTER 6. SETUP MENU 6.1 LANGUAGE 6.2 SYSTEM SETUP 6.2.1 HDD SETUP 6.2.2 PASSWORD SETUP 6.2.3 CHANNEL NAME SETUP 6.2.4 DATE/TIME SETUP 6.2.5 BEEP & PTZ SETUP 6.2.6 SYSTEM RESET 6.3 DISPLAY SETUP 6.3.1 BLANK CHANNEL SETUP 6.3.2 PIP CHANNEL SETUP 6.3.3 ADJUST CHANNEL SETUP 6.3.4 VIDEO SIGNAL TYPE 6.3.5 SEQUENCE 6.3.6 BOUNDARY COLOR 6.3.7 BACKGROUND COLOR 6.4 EVENT SETUP 6.4.1 RECORD TIME 6.4.2 SENSOR IN 6.4.
◄Triplex DVR► Contents 6.6 NETWORK SETUP CHAPTER 7. EXTERNAL TERMINAL INFORMATION 7.1 RS-232 7.2 ALARM IN/OUT & RS-485 7.4 ETHERNET & USB CHAPTER 8. SPECIFICATIONS 53 54 54~55 56~57 58 59 CHAPTER 10. NETWORK CLIENT VIEWER MANUAL 10.1 SYSTEM REQUIREMENT 10.2 NETWORK ENVIRONMENT 10.3 NETWORK VIEWER INSTALLATION 10.4 NAMES & FUNCTIONS 10.5 OPERATION 10.5.1 LIVE VIEW MODE 10.5.2 PLAYBACK MODE 10.5.4 FILE PLAY MODE 10.5.5 CD PLAY MODE 60 61~62 63 63~64 65 66 67 CHAPTER 11.
◄Triplex DVR► CHAPTER 1.
◄Triplex DVR► Audio • 1 channel audio recording in real time • Audio channel select link for each camera channel BACKUP • CD-RW backup • USB Backup (Still image backup) (Only available for 16CH DVR) General • Built-in hardware Watchdog • Automatic time adjustment through Network • VGA output for PC monitor (Optional) • S-Video output • Alarm In/Out, RS-485, RS-232 Connections • Loop-through connections • Support of multiple Languages 7
◄Triplex DVR► CHAPTER 2. PACKING DETAILS 1. DVR 2. Network Viewer Program CD 3. User’s Manual 4. Remote controller 6. DC Adaptor 7. Power Cord 5. Battery 8. HDD Screws CONTENTS 1. DVR System 2. Network Viewer Program CD 3. User’s Manual 4. Remote controller 5. Battery 6. DC Adaptor 7. Power Cord 8.
◄Triplex DVR► CHAPTER 3. NAMES AND FUNCTIONS 3.1 FRONT PANEL 7 9 11 8 18 19 2 3 4 5 16 6 17 13 14 10 15 1 20 12 1. 1 to 16 Channel Selection / Direction • To select a channel to be viewed as full-size screen during live display or playback. • To navigate, press Up(1) / Down(2) / Left(3) / Right(4). 2 ~ 5. LED Signs • There are four LED signs that indicate current status. 2. POWER : DVR power status 3. NET : ON means connection status via network.
◄Triplex DVR► 10. TRI (TRIPLEX) • To convert to triplex function like 8 channel live display and 8 channel playback in the screen simultaneously. • Press the button first, you will have CH1 ~ CH 8 live displays and playbacks and press it again, you will do other channels like CH9 ~ CH16 live displays and playbacks. - When you press the button in live display mode, you will see 8 channel live displays and 8 channel playbacks with no video.
◄Triplex DVR► 3.
◄Triplex DVR► 1. Cooling Fan 2. Power Switch 3. AC Power Inlet 4. 16 BNC connectors for camera input 5. 16 BNC connectors for monitor output These are mainly for monitors. And also you can use these for VCR recorder backup. 6. Audio In / Out Port 7. USB Port (16CH Only) 8. RS-232 Port (9 Pin D-Sub Connector) • It is mainly for download port for system upgrade. 9. Alarm In / Out and RS-485 Port (25 Pin D-Sub Connector) • It is to communicate with external sensors, alarm and PTZ camera to control. 10.
◄Triplex DVR► CHAPTER 4. INSTALLATION 4.
◄Triplex DVR► 4.2 INDIVIDUAL CONNECTION 4.2.1 POWER * Connect the DC adaptor provided in the package. * And then turn on the power switch. 4.2.2 CAMERA 16 Cameras …………………………............... * Connect a female BNC connector of each camera to a male BNC connector, ”CAMERA IN” ports.
◄Triplex DVR► [ Main Monitor ] 4.2.3 MONITOR * Connect the female BNC for monitor output. * Connect the male DIN socket for S-VIDEO monitor output.
◄Triplex DVR► 4.2.5 AUDIO Audio Amplified Speaker Monitor * Audio Input - AUDIO IN : Connect the RCA Line Jack of the relevant equipment (for example, a camera with a built-in microphone ) to the AUDIO IN port. * Audio Output - AUDIO OUT : Connect the RCA Line output to a monitor with a built-in speaker. Note This DVR can be connected only with a line audio and does not support a microphone for audio input. To record audio, AUDIO function should be enable in the AUDIO setup of main menu.
◄Triplex DVR► 4.2.6 USB (USB 2.0 port) * The USB port is provided to connect USB memory stick for video still image copying. * This function is available only for 16CH DVR. * Installation Process 1) Turn off the power of DVR. 2) Connect USB memory stick to DVR. 3) Turn the power of DVR on.
◄Triplex DVR► CHAPTER 5. OPERATION 5.1 FACTORY DEFAULT 5.1.1 Language : English 5.1.2 System Setup - Overwrite : ON - Password : OFF (when switched on default password is 0000) - Channel Name Setup : Live & PB - ON - Date / Time Setup : Live & PB - ON - Rec.
◄Triplex DVR► 5.2 FRONT PANEL CONTROL FUNCTION 5.2.1 MULTI DISPLAY Users can set “MULTI DISPLAY” functions in any mode. It converts to 16 channel live display on the screen as below by pressing Mode button. * To convert to live display, press MODE button in any mode. You can surf 13 CH / 9 CH / 8 CH / 6 CH display by pressing MULTU button repeatedly.
◄Triplex DVR► 5.2.2 PIP DISPLAY You can select PIP ( Picture In Picture ) options by pressing PIP button repeatedly. PIP mode offers a convenient way of monitoring multiple channels while focusing more attention on a particular channel. It has a main video channel view and up to 3 small video channel views on the screen. You can surf 1 PIP/ 2 PIPs/ 3 PIPs mode with 4 positions by pressing PIP button repeatedly. To release this mode, press another function button on the front panel.
◄Triplex DVR► 5.2.3 SWITCHING DISPLAY If you select SEQ Mode, channels will be switched automatically among 17 types of display in the order of “CH 1-CH 2-CH3- …- CH 15- CH 16-16 channel Mode” and keep the order until you press other function button. The DVR skips channels with no video. You can find that the DVR indicates “S” in the upper left of the screen in this mode. To release this mode, press other function button on the front panel. [ CH 1 ] [ CH 2 ] It indicates current status is “Auto Mode”.
◄Triplex DVR► 5.2.4 TRIPLEX DISPLAY Triplex function (simultaneous Live Display, recording, playback and network transmission) [ 16CH Playback] - Press TRI button on the front panel in playback mode and then you will see 8 channel live display mode and playback mode with each channel 1~8 as below. - To surf the other 8 channel live display and playback with each channel 9~16, press Up/Down button in the remote controller.
◄Triplex DVR► [ 16CH Live Display] - Press TRI button on the front panel in live display mode and you will see 8 channel live display and 8 channel playback with no video as below. Because the DVR has no playback videos at that time. - To surf the other 8 channel live display and playback with each channel 9~16, press Up/Down button in the remote controller. - To return to live display mode, press Multi button or TRI button again.
◄Triplex DVR► 5.2.5 DVR INFORMATION It shows all information about the DVR system like HDD, CD-burner and software version. You can access system information easily just by pressing INFO (Information) button. 1) MASTER - Model : It shows the model no. of Master HDD. - Size : It shows the size of Master HDD. - Rec. : It means the capacity of used HDD. - Over : It means how many times the HDD is overwritten. 2) SLAVE - Model : It shows the model no. of Master HDD. - Size : It shows the size of Master HDD.
◄Triplex DVR► 5.2.6 RECORD 3 1 2 1. If you press REC button on the front panel of the DVR, you will see REC in green on the right bottom of screen. It means the DVR is in the recording process. - MA-REC : It records videos in Master HDD. - SL-REC : It records videos in Slave HDD. • To release REC function, press REC button again. 2. It indicates that playback function is on in live display mode, which is one of our main features, that is simultaneous multi-function operation in one screen.
◄Triplex DVR► 5.2.7 SEARCH & PLAYBACK With Triplex function, you can enter search menu while the DVR is in recording mode. So you don’t need to press "STOP" button on the front panel to stop recording. Now you press SEARCH button on the front panel. You can scroll through recordings using “Up/Down” button and navigate among pages of the recordings using “Right/ Left” button. To view a desired recording on the list, press “ENTER” button where the recording is highlighted.
◄Triplex DVR► 5.2.7.2 EVENT LIST SEARCH 1) Press SER button on the front panel. 2) Select “Event List Search” by using Up/Down button and press ENTER button. 3) Select one between MASTER and SLAVE by pressing SER button. 4) Select your desired one in the recording lists and press ENTER button. 5) It plays the list. * To be out of this menu, press MENU button repeatedly. 5.2.7.3 DATE/TIME SEARCH 1) Press SER button on the front panel.
◄Triplex DVR► 5.3 REMOTE CONTROLLER 5.3.1 REMOTE CONTROLLER FUNCTIONS 1 2 3 4 6 10 5 7 8 11 9 12 14 13 15 18 16 17 19 21 20 22 23 24 25 26 27 28 29 1. REC (Record) 2. Mute 3. CH1~CH10 (Channel selection) 4. Zoom (2x2 digital zoom) 5. INFO (Information) 6. MENU 7. MULTI / MODE 8. PIP 9 .Auto (Sequence) 10 Left 11 ▲ Up 12 Right 13 ▼ Down 14. ENTER 15. All (Search menu) 16. Time (Search by date/time) 17. List (Search by date/time list) 18 ■ Stop 19. REW (x5, x10, x 20 rewind) 20.
◄Triplex DVR► 5.3.2 MUTE When you’d like to make the video with audio silent, you can select MUTE function in the remote controller. 1) Press MUTE button in the remote controller when monitoring the video with audio. 2) The activated icon in green in the upper right of screen is changed to one in gray with this function. 3) The DVR makes it silent. * To release this function, press MUTE button again.
◄Triplex DVR► 5.3.3 DIGITAL ZOOM You can magnify a certain part of the full size screen two times digitally when you use this function as described below. This function can be applied to all display and search modes. You can operate this function with only remote controller. 1) Select the desired channel among 16 channels. 2) Press Zoom button in the remote controller. 3) Select the area by pressing Left/Right/Up/Down button in the remote controller . And then press Zoom button again.
◄Triplex DVR► 5.3.4 PANORAMA This function enables you to monitor each channel with 16 split-channel panorama mode in the screen. It is available only in playback mode. 1) Select and play your desired video in the recording lists first. 2) Press PANORAMA button in the remote controller. 3) Select your desired channel by pressing PANORAMA button repeatedly. 4) To exit this function, press MULTI button. Note * Press PANORAMA button again in PANORAMA mode and return to playback mode.
◄Triplex DVR► 5.3.5 PTZ CONTROL To control an external Pan/ Tilt/ Zoom/Focus camera, Indicates Pan/Tilt function. 5.3.5.1 Pan/ Tilt Function 1) 16 channel display mode 1. First press P/ T button in the remote controller. 2. Select your desired channel by pressing P/T button repeatedly. 3. Control the camera with the direction buttons (Up/ Down/ Right/ Left). 4. To release this function, press P/T button repeatedly until “P/T” disappears on the screen. P/T Speedt set up???? Indicates Pan/Tilt function.
◄Triplex DVR► Indicates Zoom Focus function. 5.3.5.2 Zoom/ Focus Function 1) 16 channel display mode 1. First press Z/ F button in the remote controller. 2. Select your desired channel by pressing Z/F button repeatedly. 3. Control the camera with the direction buttons (Up/ Down/ Right/ Left). 4. To release this function, press Z/F button repeatedly until “Z/F” disappears on the screen. Indicates Zoom Focus function. 2) One channel mode 1.
◄Triplex DVR► 5.3.6 BACKUP 5.3.6.1 CD-RW BACKUP 1. Insert empty CD into CD-RW of DVR. Select your desired list and play it. It shows current time and recording time on the screen. 2. To operate CD-RW function, press “CD” button in the remote controller. It pauses playback mode and shows “CD-RW backup checking” on the screen, which may takes about 1 minute to complete “checking”. 3. It indicates that it is ready for CD-RW backup mode showing “Ready” on the screen to users.
◄Triplex DVR► 4. It burns CD showing “Burning” on the screen. It updates stop time and recorded CD capacity as it burns CD with data. Users can stop the burning by pressing Right button at any time as they want. 5. It stops burning CD showing “Closing” on the screen after completing it. For your reference, it usually takes max. 30 minutes to burn 700M empty CD. 6. The burned CD comes out automatically from CD-RW. It pauses the video showing “Close” on the screen.
◄Triplex DVR► CHAPTER 6. SETUP MENU 6.1 Language • When you first call the main menu via the MENU button, you’ll see that the current language is highlighted (see screen shot above). • To exit main menu, press MENU button.
◄Triplex DVR► 6.2 System Setup 6.2.1 HDD Setup This menu enables HDD setup. 1) Overwrite ON/OFF To enable (ON) or disable (OFF) to overwrite HDD. 2) Record OSD ON/OFF To show “REC” in green in the right bottom of screen during recording mode. Note - “MA-REC“ shows videos are recorded in master hard disk. - “SL-REC” shows videos are recorded in slave hard disk. 3) Format To format the HDD, press ENTER button and then select YES. You have to make sure of it before HDD format.
◄Triplex DVR► 6.2.2 Password Setup This menu allows to choose system password. 1) Select ON/OFF To enable (ON) or disable (OFF) a password. 2) Input **** To type in your desired 4 letter password among 0~9 by pressing ENTER & direction button. To return to the sub menu, press MENU button after completing password input. Note Remember that the password was set to 0000 in factory mode. • To return to main menu, press MENU button.
◄Triplex DVR► 6.2.3 Channel Name Setup To make camera names easy to remember, you can assign names to individual channels up to 8 characters per channel. For example, if your one external camera is located in a factory, you can name it as “factory”. You can see videos with this name on the screen during operation. 1) Live ON/OFF 2) PB ON/OFF - When turned ON, it enables display of camera names. - When turned OFF, it disables display of camera names.
◄Triplex DVR► 6.2.4 Date/ Time Setup Everybody agrees that surveillance digital video recorders must indicate the exact date and time information in which an event took place in order to be used as evidence. Therefore, configuring the DVR to correct time and date is very important. . 1) Live ON/OFF 2) PB ON/OFF - When turned ON, it enables Display of camera names. - When turned OFF, it disables Display of camera names.
◄Triplex DVR► 6.2.5 Beep & PTZ Setup This menu enables recording beep and external Pan/ Tilt & Zoom/ Focus cameras setup to communicate with. 1) PAN/ TILT Hitron / LG / Dongyang / PELCO-P / PELCO-D To select a desired protocol which is used for communication between the external Pan/ Tilt camera and the DVR set. Note Compatible Pan/ Tilt camera list - All cameras using LG, Hitron, Dongyang protocol.
◄Triplex DVR► 6.2.6 System Reset ON/OFF To reset the system, press Enter button and select YES. • To return to main menu, press MENU button. You have to make sure of it before system reset. Once system reset, all data that you had selected previously are converted to factory mode like password.
◄Triplex DVR► 6.3. Display Setup 6.3.1 Blank Channel Setup To enable to make channels hidden on the screen during live display mode as below. CH 1 ~ CH 16 ON/OFF To return to main menu, press MENU button. Note Even though some channels are hidden in the screen during live display mode, the DVR has been recording.
◄Triplex DVR► 6.3.2 PIP Channel Setup You can select PIP ( Picture In Picture ) options. PIP mode offers a convenient way of monitoring multiple channels while focusing more attention on a particular channel. It has a main video channel view and up to 3 small video channel views on the screen. Main CH 1 ~ CH 16 Sub 1 CH 1 ~ CH 16 Sub 2 CH 1 ~ CH 16 Sub 3 CH 1 ~ CH 16 To define which channel is the main channel for full screen or sub channel among 16 channels.
◄Triplex DVR► 6.3.3 Adjust Channel Setup This menu allows color adjustment options for individual cameras. 1) Channel CH1 ~ CH 16 - To select your desired channel to adjust video display. 2) CON (Contrast) 50 - To control light and shade of video display. 3) HUE 50 - To control color tone of video display. 4) BRI (Brightness) 50 - To control brightness of video display. 5) COL (Color) 50 - To control saturation of color of video display. • To return to main menu, press MENU button.
◄Triplex DVR► 6.3.4 Video Signal Type NTSC/PAL To select your local video signal type between NTSC and PAL, press Enter button and select it. It reboots the system automatically after your selection. It reboots the system automatically after your selection. Once it reboots, all data that you had selected previously is set to factory default. 6.3.5 Sequence 3 sec ~ 30 min To select interval time of Auto Switch.
◄Triplex DVR► 6.3.6 Boundary White/Black/OFF To select the boundary color that is divided into each channel. 6.3.7 Background Blue/Black To select the background color of no video channels between two colors. • To return to menu, press MENU button.
◄Triplex DVR► 6.4. Event Setup This screen enables simple set up of DVR motion detection, alarm and external sensor configurations 6.4.1 REC Time 10 sec ~ 30 min Once event recording is triggered, the video will be recorded compulsorily during the time selected by the user or administrator. 6.4.2 Sensor In N.O/N.C The Sensor-in terminals of the DVR are used to connect external motion sensors or door/window contacts. There are two types of general sensors in the market. The one is "normal mode-open“, N.
◄Triplex DVR► 6.4.3 Event Action To select notice method in order to make users get more attention when event recording occurs. 1) Alarm Out ON/OFF You can set to enable (ON) or disable (OFF) the outbound signal from the DVR. 2) Sensor ON/OFF When DVR detects signals from external sensors, DVR will beep or OSD to get your attention. - BEEP + OSD : Beeps and shows “S” letter together in the channel with video loss.
◄Triplex DVR► 6.4.4 Motion Setup This menu enables users to set motion functions. 1) Channel CH1~CH16 You must manually set each channel for the motion detection area. Select a channel for this motion detection. 2) Sensitivity 1~15 It offers 1 to 15 level of sensitivity. Remember that the higher level is more sensitive to detect motions. 3) Area OFF/FULL/SET - OFF : Disable to select motion areas. - FULL : Select full area as motion area. - SET : To select the area as you desire, move to POSITON menu.
◄Triplex DVR► 6.5. Record Setup Here you can set recording options. 6.5.1 Resolution High / Normal There are two recording modes: High and Normal. If you set it to high mode, DVR records video channels in 720x576 resolution. If you set it to Normal mode, DVR records video channels in 352x288 resolution. 6.5.2 Rec. Speed 1~50 F/S (High mode) / 100F/S (Normal mode) You can select various recording speed in frames per second (F/S). 50 F/S in high mode means that it records 50 images per second.
◄Triplex DVR► 6.5.5 Channel Enable CH1 ~ CH16 (High Mode) / Group 1~Group 4 (Normal Mode) - ON : Enable to record the channels - OFF : Disenable recording for channels - Each group indicates each 4 channels. (For example, group 1 is CH1 ~ CH4) ( * Note : 8CH - Group1~2 / 4CH - CH1~CH4) 6.5.6 Audio Setup 1) Channel CH1~CH16 It is to select one audio channel among 16 channels. 2) Icon Display ON/OFF To enable icon of audio function in right top of screen as below. 6.5.
◄Triplex DVR► 6.6 Network Setup To monitor and control videos remotely through internet, you need to have the right set up. 6.6.1 IP Address *000.000.000.000 Type in the IP address of your DVR. 6.6.2 Subnet Mask *000.000.000.000 Type in the Subnet mask number. 6.6.3 Gateway *000.000.000.000 Type in the Gateway number. 6.6.4 Bypass ON/OFF - ON : It is recommended in Intranet connection. Its display speed faster than “Bypass-OFF”. - OFF : It is recommended in Internet connection.
◄Triplex DVR► CHAPTER 7. EXTERNAL TERMINAL INFORMATION 7.
◄Triplex DVR► [ 8CH DVR ] RS-232 & Alarm In/Out & RS-485 [ 4CH DVR ] 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 No 8CH DVR No 4CH DVR 1~8 Alarm In 1~4 Alarm In 9 ~ 14 GND 5 ~ 14 GND 15 RX 232C 15 RX 232C 16 TX 232C 16 TX 232C 17 ~ 20 GND 17 ~ 20 GND 21 Alarm Out COM 21 Alarm Out COM 22 Alarm Out NC 22 Alarm Out NC 23 Alarm Out NO 23 Alarm Out NO 24 485B 24 485B 25 485A 25 485A 55
◄Triplex DVR► 7.
◄Triplex DVR► [ 8CH DVR ] RS-232 & Alarm In/Out & RS-485 [ 4CH DVR ] 13 12 11 10 9 8 7 6 5 4 3 2 1 25 24 23 22 21 20 19 18 17 16 15 14 No 8CH DVR No 4CH DVR 1~8 Alarm In 1~4 Alarm In 9 ~ 14 GND 5 ~ 14 GND 15 RX 232C 15 RX 232C 16 TX 232C 16 TX 232C 17 ~ 20 GND 17 ~ 20 GND 21 Alarm Out COM 21 Alarm Out COM 22 Alarm Out NO 22 Alarm Out NC 23 Alarm Out NC 23 Alarm Out NO 24 485A 24 485A 25 485B 25 485B 57
◄Triplex DVR► 7.
◄Triplex DVR► CHAPTER 8.
◄Triplex DVR► CHAPTER 10. NETWORK CLIENT VIEWER MANUAL 10.1 SYSTEM REQUIREMENT - Pentium III or above recommended - O/S : Microsoft Windows 2000 / XP - 256MB RAM or above recommended - Super VGA 16M or above recommended - 10/100 Base T network card for LAN operation 10.2 NETWORK ENVIRONMENT Client PC DVR Minimum More than 1 Mbps More than 0.5 Mbps Recommend (16 Frames/sec) More than 3 Mbps More than 3 Mbps * Transfer rate of image varies with the number of client accessed to DVR. 10.
◄Triplex DVR► 10.
◄Triplex DVR► 10 DVR Show that the DVR is remotely operated AVI Show that storing the video by AVI file format is on Local Show that storing the video by MJPEG format is on Connect Show that network viewer is connected Disconnect Show that network viewer is not connected Reading Show that the network viewer is reading data from the DVR LED 11 Close Close the network viewer 12 Setup Type in DVR IP address 62
◄Triplex DVR► 10.5 Operation This network viewer program has 4 types of operation modes. [ Live View / Playback / File Play / CD Play ] Each operation mode is designed for its own purpose. Please refer to the details for your use. No Description Mode 1 Live View To monitor live display 2 Playback To playback videos stored in the HDD of DVR 3 File Play To play videos stored in user’s PC HDD 4 CD Play To play CD with videos 10.5.
◄Triplex DVR► 10.5.1.1 To connect to DVR server, 1. Click Setup button, type in your DVR IP address and Port 2. Press Connect (log-in) button and type in your ID and password. Please remember that factory default is as below. - ID : 12345678 / - PW : 00000000 3. Finally press Play button and then you will monitor live display.
◄Triplex DVR► 10.5.2 Playback Mode This mode enables you to access all recording list in the remote DVR. When this function is on, “DVR” LED below is activated. 1 2 3 4 No Names Description 1 HDD Selection Select HDD between master and slave 2 Event List Access event list in the remote DVR 3 Record List Access all recording list in the remote DVR 4 Date/Time Search Search the video upon your specific date/time in the remote DVR • To connect to Playback mode, 1.
◄Triplex DVR► 10.5.4 File Play Mode This mode enables you to access all recording lists that is stored in the HDD of your PC. 1 2 No Names Description 1 Open Select your desired file in your PC. 2 Recording Time Show start & end time of the file • To connect to File Play mode, 1. Press log-in button and type in your ID and password. Please remember that factory default is as below. ID : 12345678 / - PW : 00000000 2. Press Play button and then you will monitor live display. 3.
◄Triplex DVR► 10.5.5 CD Play Mode This mode enables you to play CD with data (videos). 1 2 No 1 2 Names Description Drive Selection Select the drive that CD-ROM is installed. File Save (Start) Start saving CD data as “MJPEG” format in the default directory of user’s PC. File Save (Stop) Stop saving CD data as “MJPEG” format in the default directory of user’s PC. • To connect to CD Play mode, 1. Press log-in button and type in your ID and password.
◄Triplex DVR► CHAPTER 11. Q & A 1 The system power does not turn on. Check if the power cable is connected correctly. Check if the input voltage is correct. If the system power does not turn on when the power cable is connected correctly, please contact the local distributor or manufacturer. 2 The system power is turned on, but no video is displayed on the monitor. Check if the monitor power cable is connected properly Check to make sure the monitor is turned on.
◄Triplex DVR► 6 Audio data recorded with video data is not playing. Check if the audio recording option is correctly set to the camera you wish to record audio. Check if the audio mute is enabled. Check if the microphone and speaker port on the rear of DVR system are connected correctly. Check if the connected microphone is working properly. Check if the connected speaker is working properly. 7 Color of videos are strange or videos are shown abnormally.
