Service manual

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION , REVISION
3-6 Section 3-2 - Receiving and Unpacking LOGIQ™ 3
Section 3-2 Receiving and Unpacking LOGIQ™ 3 (cont’d)
7.) Remove the Plastic Bag and the Plastic Wrapping around the LOGIQ
TM
3.
8.) Remove the Monitor Support and Monitor Packing.
9.) Remove the adhesive tapes attached at the four corners of the Top Cover.
10.)Put the Ramp Board on floor and prepare the slope to put the console down.
11.)Unlock the brakes on the front castors, then carefully put the console off the Palette.
Figure 3-5 Moving the LOGIQ™ 3 from the crate