Service manual

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION , REVISION
3-2 Section 3-1 - Overview
3-1-3 Average Installation Time
The LOGIQ™ 3 has been designed to be installed and checked out by an experienced service
technician in approximately Four hours. LOGIQ™ 3 console with optional may take slightly longer.
NOTE: For Installing Options average installation time is approximately between 0.5 - 2hrs depending
on the required configuration
3-1-4 Installation Warnings
1.) Since the LOGIQ™ 3 weighs approximately 155 kg (342 lbs)without options, preferably two people
should unpack it. Two people are also preferable for installing any additional bulky items.
2.) There are no operator serviceable components. To prevent shock, do not remove any covers or
panels. Should problems or malfunctions occur, unplug the power cord. Only qualified service
personnel should carry out servicing and troubleshooting.
NOTE: For information regarding packing labels, refer to LABELS ON PACKAGE.
3.) After being transported, the unit may be very cold or hot. If this is the case, allow the unit to
acclimate before you turn it on. It requires one hour for each 2.5
o
C increment in it's temperature, if
it is below 10
o
C or above 40
o
C.
Table 3-2 Average Installation Time
Description Average Installation Time Comments
Unpacking the scanner Approximately 0.5 hour
Scanner wo/options Approximately 0.5 hour Dependant on the required configuration
CAUTION
Equipment damage possibility. Turning the system on without acclimation after arriving at site
may cause the system to be damaged
°C 60 55 50 45 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 -35 -40
°F 140 131 122 113 104 96 86 77 68 59 50 41 32 23 14 5 -4 -13 -22 -31 -40
hrs 8 6 4 2 0 0 0 0 0 0 0 2 4 6 8 101214161820
Table 3-3 Time for Settlement