Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2LOGIQ
TM
3 SERVICE MANUAL
Chapter 8 8-19
8-10-5 Loading Applications Software (cont’d)
7.) REMOVE the Applications CD
8.) From the Start Applications dialog box, select START
.
9.) Select CANCEL
.
NOTE: VERY IMPORTANT - Installation of R1.1.1 Application software upgrades the Direct CD
software that controls the CDRW Drive to enable x24 Write operation. This software is not
backwards compatible. Once R1.1.1, software has been installed you may not reinstall any
earlier application software version without first reinstalling the Base Image Load Software.
Failure to do this will reduce the reliability of the system.
Figure 8-19 Start Software