Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2LOGIQ
TM
3 SERVICE MANUAL
Chapter 8 8-17
8-2-4-4 Importing Data
To import an exam(s) to another Ultrasound system:
1.) At the other Ultrasound system, insert the MOD or CD-ROM.
2.) Press Patient, press More, then Import. The Import from pop-up message appears. Press OK.
3.) The Patient menu just shows the patients available for import from the removable media you
just loaded onto the system.
4.) Select the patients to be imported.
5.) Press Copy Patient from the Select All/Copy Patient menu.
6.) Please wait for the patient information to be copied to this Ultrasound system. Informational
messages appear while the import is taking place.
7.) Press F3 to eject the media.
8-2-5 Loading Applications Software
1.) Place the “Application Software” CDROM into the CDROM drive.
2.) Press the Start button on the tool bar at the bottom of the LCD screen and select “Run…”.
Enter “g:\LoadSoftware” into the dialog box as shown in Figure 8-83.
3.) You will see a screen that warns you that you are about to load software, press the Enter key
or select OK to start the process.
4.) You will see a Command (CMD) window open as shown in Figure 8-84.
Figure 8-15 Import Pop-up Message
Figure 8-16 Run Load Software