Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2LOGIQ
TM
3 SERVICE MANUAL
Chapter 8 8-13
8-10-4-1 Save As (Saving Images to CD-ROM to View on Any PC) (cont’d)
8-2-4-2 Moving Images (Image Archive)
To archive images:
1.) Insert the backup media. Format the backup media, CD-ROM or MOD. Select the Utility tab
on the Touch Panel. Select Connectivity, then Tools. You MUST set up a protocol for locating
images on the media by labeling it consistently. The best way is to label images by date.
2.) Format the MOD/CD-ROM.
3.) Press Patient. Set the Dataflow to store images directly to MOD or CD-ROM - or select the
Dataflow tab and select the Removable MOD or Removable CD-ROM dataflow.
Table 8-2 Higher Resolution Store Options
Image Type Store as Image Only Store as Secondary Capture
CINE Loop
Gives you a loop of just the image (no title
bar and scan information).
Gives you a single image of the video area.
DO NOT DO THIS BECAUSE YOU DO
NOT KNOW WHICH IMAGE FROM THE
LOOP THAT YOU ARE GETTING.
Still Image
Gives you a single image (no title bar and
scan information).
Gives you a single image of the video area.
Figure 8-9 Format MOD/CD-ROM Screen