Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2 LOGIQ
TM
3 SERVICE MANUAL
7-8 Section 7-4 - Diagnostics
Section 7-4
Diagnostics
As described in Chapter 5 - Components and Functions (Theory), the overall service platform uses a
web-based user interface (UI) to provide access to common service components.
The Diagnostic home page displays a listing of test categories consisting of Common Diagnostics and
LOGIQ
TM
3 Diagnostics. Expand the desired main category to select groups or individual tests.
Acquisition Diagnostics is one of three main headings under the GSUI Diagnostics Tab.
Individual selections run diagnostics and return status information identifying any problems.
When you select a test to run, the display changes as shown in Figure 7-10 on page 11 .
1.) Instructions Frame
- Displays either a test-specific text or the default instructions.
2.) Status Frame
- Initially displays the last known status for a selected diagnostic. Once the diagnostic starts,
the frame displays the “current” status of all test results.
- The Status Frame also contains the user interface elements used for Diagnostic Control and
Operator Feedback.
3.) Execute Button
- This switch has two modes - each with appropriate text:
- Execute - to start the diagnostic
- Abort - to stop a diagnostic
Figure 7-6 User Acquisition Diagnostics