Service manual

GE MEDICAL SYSTEMS
D
IRECTION 2300749-100, REVISION 2 LOGIQ
TM
3 SERVICE MANUAL
4-28 Section 4-6 - Peripheral Checks
Section 4-6
Peripheral Checks
Check that peripherals work as described below:
Table 4-14 Peripheral checks
Step Task to do Expected Result(s)
1.
Press(FREEZE
) Stop image acquisition.
2.
Press (PRINT 1
) or (PRINT 4) on the Control panel
The image displayed on the screen is printed on B&W or Color
printer, depending on the key assignment configuration.
3.
Press VIDEO
on the Control Panel. To start the video counter at a different point:
4.
Press VIDEO or B MODE on the Control Panel to return to the scanning mode
5.
Press REC/PAUSE on the Control panel.
to Start Recording
A red dot is displayed in the VCR status area on the Title bar to
indicate that recording has begun
6.
Press REC/PAUSE on the Control panel.
To Stop recording
The video status icon is changed to (Pause)
7.
Press VIDEO
on the Control Panel. and the assignable play To start Play back an examination
8.
Use the Assignable keys on the Control panel
to perform actions on the recorded session, such as stop, pause,
rewind or fast forward.
The video status icon in updated accordingly.
9.
While in playback mode, use the TRACKBALL
to adjust the video
playback speed and scroll through the record.
To search on the tape
10.
Press the assignable PAUSE to stop the tape at the desired frame.
11.
When playing back an examination
part of it can be stored on the computer’s memory as a cineloop.The
cineloop enables the user to perform further operations on the
stored section (see for further information on cineloop operation).
12.
Press (FREEZE) while playing back a recorded session.
To store a recorded sequence as a cineloop. The last few
seconds are stored as a cineloop.